Malaysia Airlines: What is a transponder?

You keep hearing experts talking about the missing Malaysia Airlines Flight 370 and the fact that its transponder went from on to off.

What are aviation transponders. Here's a quick primer:

Q. What information does a transponder send and who does it send it to?

A transponder is a radio transmitter in the cockpit that receives a signal from "secondary" radar and returns a squawk code with the aircraft's position, its altitude and its call sign. It is constantly being pinged, helping air traffic controllers on the ground determine the airplane's speed and direction, too.

Q. What does "squawk" mean?

It's a four-digit identifying code that the pilot enters into a transponder for each flight. It helps air traffic control recognize each plane.

Q. Why are transponders necessary?

Primary radar is somewhat effective at seeing objects -- it paints targets -- and at displaying them with a blip on a screen. The bigger the object, the better. Transponders enhance the signal and provide additional information for air traffic control through secondary radar.

Q. Is there a way to use it to indicate a problem on board the aircraft?

There are codes for different emergencies. For a hijack, it's 7500. For communications failure, 7600. Emergencies are 7700.

Q. How do you turn off a transponder?

There is a switch that you would move from "ON" or "SBY" (standby) or "ALT" (altitude). You could also pull the circuit breaker for the transponder in the cockpit .

Q. Why would you turn off a transponder during a normal flight?

There could be several reasons. One reason could be when airplanes get close to each other (perhaps they are approaching an airport). Air traffic controllers may then request pilots to turn the transponders off or to standby. Also, if the transponder is sending faulty information, the pilot might want to turn it off. Planes are still visible on primary radar until they get below the radar's coverage ability.