Skip to main content
Part of complete coverage on

Pitch perfect: The quest to create the world's smallest hearing aid

Danish technology company Widex has pioneered a discreet digital hearing aid which matches the exact dimensions of a wearer's ear canal. The patented technology is called CAMISHA (Computer Aided Manufacturing of Individual Shells for Hearing Aids.) Danish technology company Widex has pioneered a discreet digital hearing aid which matches the exact dimensions of a wearer's ear canal. The patented technology is called CAMISHA (Computer Aided Manufacturing of Individual Shells for Hearing Aids.)
HIDE CAPTION
Small and perfectly formed
Evolution of the hearing aid: 1956
1961
1987
2000
2012
<<
<
1
2
3
4
5
6
7
8
9
10
11
12
13
14
>
>>
STORY HIGHLIGHTS
  • Danish hearing aid company develops manufacturing process based on 3D printing
  • The "CAMISHA" process allows exact molds of a person's ear canal to be produced
  • As a result, the company has produced the world's smallest, most comfortable hearing aid

Editor's note: Widex, the company featured in this article, was awarded the 2012 European Inventor Award for its CAMISHA technology by the European Patent Office (EPO.) The EPO is the sponsor of CNN's Make, Create, Innovate series. However, CNN retains full editorial control over all of its reporting. Read about CNN's special reports policy.

(CNN) -- On a windy hillside near Copenhagen, Denmark, are the headquarters of a company with a simple goal: to make the smallest hearing aids in the world.

Widex, one of the globe's largest hearing aid companies, developed its first model in 1956. Back then, it came with its own battery pack and had to be strapped to the chest.

They've been gradually shrinking ever since and 3D printing technology has now enabled the slender machines to vanish almost completely into the ear.

"The ear canal is actually extremely sensitive, so the tiniest irregularity may be intolerable
Soren Westermann, Widex CEO

"The smallest are less than the size of the tip of a little finger," says Soren Westermann, the Widex CEO whose father co-founded the company nearly 60 years ago.

Read: Lytro, the amazing new perspective on photography

Back then, hearing aid technology had just made a great leap forward following the invention of the electric transistor in 1948.

Westermann recalls that when he was born, hearing aids had been hulking, impractical devices "that you wore on your back." But the energy efficiency and relatively small size of the transistor -- which is used to amplify electronic signals -- paved the way for the now familiar "behind the ear" style of hearing aid.

Since then, the mechanics have become evermore sophisticated, moving from analogue amplification to digital and from behind the ear to right inside it.

Widex are now the pioneers of a manufacturing process known as Computer Aided Manufacturing for Individual Shells for Hearing Aids or, less cumbersomely, CAMISHA.

The process takes advantage of recently developed 3D printing technology to create staggeringly precise molds of the ear canal.

Hearing aid design breaks the mold
The enduring cult of the Rubik's Cube
Sugru: The future of fixing?
Li-Fi could be the future of the web

"First we make the impression of the ear," explains Westermann. "It's still done the old-fashioned way: impression material (liquid silicone) is injected in the ear and as it sets it shows a perfect reproduction of the ear canal."

But it's the second stage of production where things get smart. Standing in the Widex lab, Westermann demonstrates how the finely detailed mold is scanned through a 3D scanner taking millions of measurements to create what he calls a "3D point-cloud" representing exactly the inside of a patient's ear.

Then, layer-by-layer, a large 3D printer replicates the precise dimensions of the mold using photo-acrylic gel, a type of liquid plastic.

Finally, the tiny mechanical components -- consisting of a microphone, a receiver, a battery, and an almost microscopic computer chip -- are inserted into the plastic shell.

"The detail that we can reproduce is down to a hundredth of a millimeter," claims Westermann.

Read: The little cube that changed the world

The precision and efficiency of the process has resulted in the world's smallest ever hearing aids. For Westermann, this is a significant development.

"Invisibility is extremely important ... It is so clear that nobody wants to demonstrate or show their hearing loss," he explains.

But the CAMISHA process offers more than discretion. Unlike previous models, which blocked large parts of the ear with big plastic shells, the so-called Invisible In-Canal (IIC) hearing aids allow for more sound to be collected naturally by the shape of the ear, and to flow down the ear canal as it would with unassisted hearing, improving the fidelity and range of sound.

"We get a lot of feedback letters, feedback from people who say 'I can't imagine why I waited five years to get one of these
Soren Westermann

The fact that the shell is modeled so exactly on the user's ear also prevents any noise from leaking out. According to Westermann, this was the cause of irritating "whistling" in previous models.

"The sound will leak from near the ear drum and out between the ear piece and the ear canal. It will leak out there and go back to the microphone, then it will feedback and whistle," he said.

In addition to these technical improvements, the precision of the mold, says Westermann, means that it is substantially more comfortable.

Previous manufacturing methods, which Westermann describes as more like a form of manual sculpting, allowed for small discrepancies between the silicone mold and the hearing aid, causing potentially significant discomfort.

"The ear canal is actually extremely sensitive, so the tiniest irregularity may be intolerable," he says.

"Now they are perfect every time. We know beforehand that they can fit, we know they are as small as they could possibly be and we know that we can make them exactly the same every time," he adds.

Read: A gripping tale of struggle and success

At least for now, however, the premium sound and comfort comes at a premium price. While you can get a conventional hearing aid for a few hundred dollars, the CAMISHA produced models range from about $1,000-$3,000 per device.

Westermann, as you might expect, says his customers rarely suffer from buyer's remorse.

"We get a lot of feedback letters, feedback from people who say 'I can't imagine why I waited five years to get one of these,'" he says.

"People tell us they had forgot the sound of the birds. They were walking in the forest and suddenly heard these birds again and they hadn't heard them for 10 years and they had forgot they were still there.

"That makes a lot of difference in your work, to know that you made a difference to somebody else."

ADVERTISEMENT
Part of complete coverage on
updated 12:09 PM EDT, Wed September 3, 2014
Mogees is a new technology that turns any object into a musical instrument, by converting the vibrations you make when you touch it into sound.
updated 7:37 AM EDT, Fri September 5, 2014
Neil Harbisson is the world's first legally recognized cyborg. He has an antenna implanted into his skull that gives him the ability to perceive color.
updated 12:18 PM EDT, Fri August 29, 2014
Move over, hoverboard: new technologies promise to make everything float free through levitation.
updated 12:45 PM EDT, Fri August 22, 2014
Getting a foothold on the property ladder can be a challenge at the best of times, and the prospects for many of us have been battered further by the global recession.
updated 8:37 AM EDT, Thu August 21, 2014
It's like a chair that isn't there, but magically appears whenever you need it. It's called the Chairless Chair. Find out how it works.
updated 5:39 AM EDT, Fri August 8, 2014
Engineer Alan Bond has been developing a new concept for space travel for over 30 years -- and his creation is now on the verge of lift off.
updated 8:10 AM EDT, Fri July 25, 2014
Crumbling buildings, burnt-out PCs, and cracked screens -- a new generation of "self-healing" technologies could soon consign them to history.
updated 5:09 AM EDT, Tue June 24, 2014
Discover a dancing cactus field, basketball on the Hudson River, and mind-bending 3D projections on robotic screens.
updated 1:07 PM EDT, Fri May 23, 2014
Would you live there? Design student Peter Trimble says it's actually a surprisingly good idea.
updated 10:50 AM EDT, Wed May 14, 2014
Alpha Sphere
Singing Tesla coils, musical ice cream, vegetables on drums... and this ball? Find out how "hackers" have created a new generation of instruments.
updated 12:43 PM EDT, Wed May 28, 2014
Technology has long learned from nature, but now it's going micro. "Cellular biomimicry" sees designers take inspiration from plant and animal cells.
updated 1:08 PM EDT, Wed April 9, 2014
Forget wearable tech, embeddable implants are here. Learn more about the pioneers who are implanting devices into their bodies.
updated 6:26 AM EDT, Wed May 7, 2014
A visitor of the 'NEXT Berlin' conference tries out Google Glass, a wearable computer that responds to voice commands and displays information before your eyes. It is expected to go to market in late 2013.
We know how wearable tech can enhance our fitness lives but there's evidence that its most significant application is yet to come: the workplace.
updated 4:13 AM EDT, Thu April 10, 2014
Samsung's research unit announces new way to synthesize graphene, potentially opening the door to commercial production.
updated 8:15 AM EDT, Mon March 31, 2014
iRobot, creators of vacuuming robot Roomba reveal how they learned from secret experiments -- in space travel, minefields, and toys.
updated 12:23 PM EDT, Fri March 28, 2014
A light-bulb glowing in middle of a room with no wires attached. "It's the future," says Dr Katie Hall.
updated 11:26 AM EST, Mon March 3, 2014
Knee replacements that encourage cells to regrow could soon be manufactured -- by spiders. Find out how.
updated 9:03 AM EST, Fri February 14, 2014
Meet Chuck Hull: the humble American engineer who changed the world of manufacturing.
updated 9:48 AM EST, Thu February 6, 2014
The key to self-knowledge? Or just the return of the phony "mood ring"? Check out our top mood-sensing technology in development.
ADVERTISEMENT